- Features + Benefits
Uses + Applications
Wall repair as simple as Patch, Paint, and Superior Finish.
The 2" patch is ideal for nail holes, nail pops, screw holes, anchor and cable cord removal damage.
The 4" patch is great for everyday wall damage caused by moving furniture, roughhousing, or relocating towel racks.
Designed to withstand doorknob impact, the 6" patch is ideal for repairs up to 3" in diameter.
It's as easy as patch, paint, and finish.
Eclipse® Rapid Wall Repair Patch
A unique and innovative drywall repair solution that is perfect for completing permanent repairs on damaged walls and ceilings.VIEW PRODUCT
Thoroughly Prep to Create a Smooth Surface
It's recommended to de-gloss the damage and surrounding drywall using sandpaper to help achieve a smooth surface and increase adhesion. Ensure the surface is smooth, dry and free of any debris and jagged edges prior to applying the patch
Repairing Textured Walls & Ceilings
If repairing textured walls or ceilings, remove the protective layer by pulling the pop-up tab immediately after applying the patch to the drywall (no need to apply the first coat of paint). Apply texture, using aerosol spray or a tectured paint roller. Allow to dry thoroughly, then apply two additional coats of paint to complete your project.
Proper Placement & Coverage
Use the gray center circle of the patch as a guide to align over the center of the damage. Be sure the damaged area does not exceed the gray area.
Ensure Proper Adhesion
Press firmly to smooth around the outer edges of the patch to ensure proper adhesion to the surrounding drywall. Only press where the patch is in contact with the drywall. Do not push through the damaged area.
Ensure Proper Paint Coverage
Apply a generous amount of paint with each coat to ensure paint covergae. Always use a paint roller - using a paint brush is not recommended as it can leave brush strokes and won't provide the best coverage.
Removing the Protective Layer
Pull the pop-up tab up and away from the drywall towards yourself in order to release the protective layer from the patch. If the protective layer does not completely come off in one piece, use your fingernail to remove the rest of the protective layer prior to applying the next coat of paint.
Trimming & Patch Customization
The patch can be cut and customized to different shapes and sizes to fit certain applications such as in corners, along trim and molding, or for outlet applications. When cutting with scissors or a utility knife, make sure the tab is still fully intact so you an remove the protective layer.
Patch may take longer to fully dry than surrounding drywall
Paint Manufacturer Instructions
Per paint manufacturer instructions it could take up to 4 weeks for paint to fully cure.
Final Finished Appearance
Patch may be noticeable and visible until it has completely dried. As it dries, it will continue to improve its appearance with the surrounding drywall
Additional Structural Integrity
For additional structural integirty, apply spackling to the damaged area, then apply the patch immediately over the damage. There's no need to wait for the compound to dry prior to applying the patch. Be sure the surrounding drywall is clean and free of material prior to applying the patch to ensure proper adhesion.
How to Patch Drywall
Follow this expert advice on how to fix a hole in drywall—no matter the size.Learn More
How to Prep Walls for Painting
Follow our plan on how to prepare interior walls for painting, and you’ll be rolling on that final coat in no time.Learn More
Social Media Gallery