DAP® POWER POINT® 230 Advanced Elastomeric Acrylic Latex Sealant
DAP POWER POINT 230 ADVANCED ELASTOMERIC ACYRYLIC LATEX SEALANT is specifically formulated for demanding interior and exterior applications, especially molding & trim applications. It delivers excellent adhesion & flexibility for a crack proof seal. It is easy to apply and tool in any climate and is paintable in just 30 minutes. It provides a durable, long lasting seal that will not shine through or discolor paint. Waterproof & weatherproof. Cured sealant is mold & mildew resistant. 60 Year. Exceeds ASTM Specification C920, Class 12.5. Interior/exterior use.
Remove any old caulk from the seam or joint by cutting or scraping it away. Then clean the area with soap and water to remove dirt, dust, grease or debris. Rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.
Want straight lines?
Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.
Get a Professional-Looking Finish
To get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.
DAP® POWER POINT® 230 acrylic latex caulk is ideal for filling and sealing gaps and cracks around window and door frames, molding, trim, baseboards, corner joints, and more. It has excellent adhesion to painted and unpainted wood, aluminum, vinyl, metal, brick, drywall, concrete and masonry.
What is the paint ready time for this product?
DAP® POWER POINT® 230 is paintable in 30 minutes.
What is the maximum joint size for applying DAP® POWER POINT® 230?
The joint size shouldn’t exceed ½” wide by ½” deep. If the joint depth exceeds ½”, insert foam backer rod material into the joint before applying the sealant.
How long is the shelf life on this product?
A minimum of 12 months from the date of production in an unopened tube.
Can I use this in a shower?
No. The product is not applicable for use in a bath or shower.
What is the recommended clean-up for DAP® POWER POINT® 230?
Before drying, they can be easily removed with soap and water. After the caulk has dried, it will need to be cut or scraped away.